
COMMERCIAL LIABILITY · FRISCO, TX
The “Wildfire Exclusion” Hiding in Your Texas Contractor Policy
If you weld, grade, or run lines in Texas, a single spark could bankrupt you if this exclusion exists.
TL;DR FOR BUSY PEOPLE
Standard General Liability policies in Texas are quietly adding “Total Wildfire Exclusions” (CG 21 59), effectively removing coverage if your work starts a fire. For contractors, this is a business-ending gap. You need to verify your policy immediately and secure a buyback or specialized E&S policy.
FAST ANSWER
- The Risk: If your policy has a Wildfire Exclusion, your insurer pays $0 for damages caused by a fire you ignite.
- The Texas Nuance: After the Panhandle fires, carriers are applying this to electrical, road, and utility contractors across the state—not just in rural areas.
- The Fix: You must negotiate a “Wildfire Buyback” or move to the Excess & Surplus (E&S) market.
The “Spark” That Costs Millions
Picture this: Your crew is grinding steel on a fence line in Collin County. It’s August, the grass is dead, and the wind is blowing 20 mph. A single spark lands in the brush.
Twenty minutes later, three custom homes and a barn are ash. The damages exceed $4 million.
You call your carrier, confident in your $2M General Liability policy and $5M Umbrella. But the adjuster points to an endorsement buried on page 64: Exclusion – Wildfire (CG 21 59).
Denied. You are now personally liable for $4 million.
This isn’t a scare tactic. According to the Texas A&M Forest Service, human activity is a leading cause of wildfires in our state. If you are a contractor relying on a “cheap” policy, you are likely playing Russian Roulette with your business.
What is the Wildfire Exclusion (CG 21 59)?
In the world of General Liability Insurance, the devil is always in the endorsements. The “Total Wildfire Exclusion” is a clause that removes all coverage for bodily injury or property damage arising out of a “wildfire.”
Crucially, insurance definitions matter. They often define “wildfire” broadly to include any uncontrolled fire spreading through vegetation, even if you started it accidentally during normal operations. Whether it’s welding slag, a hot exhaust pipe on a skid steer, or a downed utility line, if it starts a brush fire, coverage is void.
Note for Subs: If you are a subcontractor, your General Contractor’s contract almost certainly requires you to carry liability coverage without this exclusion. If you show up with it, you are in breach of contract before you even start digging.
Why Texas Contractors Are Targets
Texas has become a “hard market” for liability. Recent massive losses—like the Smokehouse Creek Fire—have spooked reinsurers. As a result, standard admitted carriers (the big household names) are tightening their belts.
They are specifically targeting classes of business they deem “high ignition risk”:
- Electrical & Utility Contractors
- Excavation & Grading
- Welding & Steel Erection
- Solar Farm Installation
- Right-of-Way Clearing
Even if you operate primarily in Frisco or Plano suburbia, your carrier may slap a blanket exclusion on your policy because your class code allows for rural work. Don’t assume you’re safe just because you aren’t working in the Panhandle.
The Solution: Buybacks & E&S Markets
So, how do you fix it? You stop buying off-the-shelf policies that don’t fit your risk profile.
1. The “Wildfire Buyback”
Some carriers will agree to remove the exclusion or limit it (e.g., capping wildfire liability at $100,000 or $1M sub-limit) for an additional premium. This is the “Buyback.” It puts coverage back into your policy where it belongs.
2. The E&S Pivot
Often, the admitted market simply says “No.” In this case, we move you to the Excess & Surplus (E&S) market. E&S carriers specialize in high-risk scenarios. They can write a policy specifically drafted to include wildfire coverage, often requiring you to follow a specific “Fire Mitigation Plan” (e.g., keeping water trucks on standby during Red Flag days).
This isn’t just about safety; it’s about contract compliance. See our guide on Action-Over Exclusions for another common trap contractors face.
The Math: Cost vs. Bankruptcy
Let’s look at the stewardship math. We often hear, “But George, the policy with the exclusion is $3,000 cheaper!”
Let’s run the numbers:
| Scenario | Cheap Policy (With Exclusion) | Proper Policy (With Buyback) |
|---|---|---|
| Annual Premium | $12,000 | $15,500 |
| Fire Damage Claim | $2,500,000 | $2,500,000 |
| Carrier Pays | $0 | $2,500,000 |
| You Pay | $2,500,000 + Legal Fees | Deductible Only |
Saving $3,500 to risk $2.5 million isn’t savings. It’s financial suicide. In the construction industry, one uninsured claim doesn’t just hurt; it liquidates your company, your equipment, and potentially your personal assets.
The Agent’s Office® Advantage
We don’t use cookie-cutter quoting engines for contractors. We read the endorsements. We specialize in high-voltage and utility risks where these exclusions hide.
We work with Lloyd’s of London syndicates and specialized domestic carriers who understand that you need real coverage, not paper thin protection. We check for Wildfire Exclusions, Silica Exclusions, and Residential Exclusions before we ever present a quote.
Stay Informed: The market changes fast. Like our Facebook page to get critical updates that affect Texas contractors.
Secure Your Business Future Today
Don’t wait for a spark to find out what’s in your policy. Let us review your exclusions today.
FAQs about Wildfire Insurance for Contractors
Can I buy a standalone wildfire policy?
Yes, specialized “Wildfire Liability” policies exist, but they are expensive. It is usually more cost-effective to negotiate a buyback within your General Liability or Commercial Auto package if possible.
Does my Commercial Umbrella cover wildfire if my GL excludes it?
Almost certainly not. Umbrella policies generally “follow form,” meaning if the primary General Liability policy excludes a risk (like wildfire), the Umbrella excludes it too. You cannot use an Umbrella to fill a coverage gap in the primary layer.
Are all contractor classes subject to this exclusion?
While any contractor can face it, we see it most aggressively applied to welders, roofers, excavation crews, and utility contractors working on right-of-ways.
You might also like:
George Azide
TEXAS CONTRACTOR SPECIALISTS
Is your business exposed?



